**Discontinued**
RFoG Repeater Module, Master
|
RRM-M8, MASTER
|
|
OPTICAL INTERFACES
|
CONNECTOR
|
LC/APC
|
|
IN PORT
|
OPERATING WAVELENGTH |
1260-1620nm
|
| RFoG DOWNSTREAM WAVELENGTH (1)
|
1550-1560nm (ITU Channel 21-34)
|
| RFoG DOWNSTREAM INPUT LEVEL
|
-6 to +10 dBm
|
|
TP 1%
|
TEST POINT
|
1% of Optical Applied to IN Port (dB)
|
|
RT-EP (Return Expansion Port)(2)
|
OPERATING WAVELENGTH
|
1260-1620nm
|
| INSERTION LOSS RT-EP TO IN PORT
|
0.5 dB
|
|
TX OUT
|
DWDM OUTPUT POWER
|
+8 .25 ± 0.25 dBm
|
| DWDM WAVELENGTH
|
1530-1562nm (ITU Channel 20-59)
|
| CWDM OUTPUT POWER
|
+8 .25 ± 0.25 dBm
|
| CWDM WAVELENGTH
|
1310nm, 1430-1610nm
|
|
DISTRIBUTION PORTS 1-8
|
DOWNSTREAM (1)
|
1550-1560nm (ITU Channel 21-34)
|
| DOWNSTREAM OUTPUT POWER
|
0 ± 0.5 dBm
|
| UPSTREAM WAVELENGTH
|
1611 ± 10nm
|
| UPSTREAM OPTICAL INPUT POWER
|
-3 to +3 dBm
|
| EIN
|
5-7 pA/√Hz
|
| PORT-TO-PORT ISOLATION
|
> 50 dB
|
|
xPON (PON OLT Interface Port)
|
OPERATING WAVELENGTH
|
1260-1360nm, 1480-1500nm, 1575-1580nm
|
| INSERTION LOSS xPON PORT TO RFoG PORTS 1-8
|
< 18 dB
|
|
S2, S3, S4 OUT (Downstream to
Slave Module)
|
RFoG DOWNSTREAM WAVELENGTH (1)
|
1550-1560nm (ITU Channel 21-34)
|
| OUTPUT POWER
|
10-10.5 dBm
|
|
RF INTERFACES
|
|
S2, S3, S4 (Slave Module Return Input Ports)
|
PASSBAND
|
5-85 MHz
|
| RF INPUT LEVEL RANGE AT TP (3)
|
TBD (dBmV)
|
|
RF PARAMETER
|
|
ATTENUATOR RANGE(4)
|
0-31.5 dB in 0.5 dB Steps
|
|
PERFORMANCE
|
|
NPR
|
TBD (dB)
|
|
DYNAMIC RANGE
|
10 dB
|
|
MANAGEMENT
|
|
LOCAL
|
Hand-held Display, CLI, GUI
|
|
REMOTE
|
SNMP v2c, Web GUI, Telnet
|
|
ELECTRICAL & OPERATIONAL
|
|
POWER CONSUMPTION
|
12W Master, 6.75W Slave
|
|
OPERATING TEMPERATURE
|
-40°C to +65°C (-40°F to +149°F)
|
|
STORAGE TEMPERATURE
|
-40°C to +85°C (-40°F to +185°F)
|
|
DIMENSIONS
|
I-HUB Housing Three-slot Module
5.8”H x 7.6”W x 2.1”D (14.7H x 19.3W x 5.3D cm)
|
|
WEIGHT
|
2.0 lbs (0.91 kg)
|
NOTES:
(1) Suggested for PON compatibility.
(2) Unit ships with fiber jumper connecting upstream transmitter to express port. Remove jumper if using separate fiber for upstream.
(3) As measured at test point, for 20%OMI, could be different for different US loads.
(4) Use to adjust until test point level indicates desired OMI. See manual for further details.
RFoG Repeater Module, Slave
|
RRM-S8, SLAVE
|
|
OPTICAL INTERFACES
|
CONNECTOR
|
LC/APC
|
|
IN PORT
|
OPERATING WAVELENGTH
|
1260-1620nm
|
| RFoG DOWNSTREAM WAVELENGTH (1)
|
1550-1560nm (ITU Channel 21-34)
|
| RFoG DOWNSTREAM INPUT LEVEL
|
-6 to +10 dBm
|
|
DISTRIBUTION PORTS 1-8
|
DOWNSTREAM (1)
|
1550-1560nm (ITU Channel 21-34)
|
| DOWNSTREAM OUTPUT POWER
|
0 ± 0.5 dBm
|
| UPSTREAM WAVELENGTH
|
1611 ± 10nm
|
| UPSTREAM OPTICAL INPUT POWER
|
-3 to +3 dBm
|
| EIN
|
5-7 pA/√Hz
|
| PORT-TO-PORT ISOLATION
|
> 50 dB
|
|
RF UPSTREAM OUTPUT TO MASTER(2)
|
|
PASSBAND
|
5-85 MHz
|
|
RF INPUT LEVEL RANGE AT TP
|
TBD (dBmV)
|
|
ATTENUATOR RANGE
|
0-31.5 dB in 0.5 dB Steps
|
|
NPR PERFORMANCE
|
TBD (dB)
|
|
ELECTRICAL & OPERATIONAL
|
|
POWER CONSUMPTION
|
6.75W
|
|
OPERATING TEMPERATURE(3)
|
-40°C to +65°C (-40°F to +149°F)
|
|
STORAGE TEMPERATURE
|
-40°C to +65°C (-40°F to +149°F)
|
|
DIMENSIONS
|
I-HUB Housing Two-slot Module
5.8”H x 5.0”W x 2.1”D (14.7H x 12.7W x 5.3D cm)
|
|
WEIGHT
|
1.3 lbs (0.6 kg)
|
NOTES:
(1) Suggested for PON compatibility.
(2) RF jumper included with each slave module.
(3) Ambient external temperature of I-HUB housing.
